50 E Main St,Newark, DE 19711
+1 302-266-4955
Your Phone's Model
Select Fault Please ChooseCharging IssuesPower On / Reset ProblemsAudio IssuesCamera IssuesNetwork IssuesScreen IssuesBattery ProblemsFace ID / Touch IDLiquid DamageOverheatingMotherboard FaultsWifi / Bluetooth / GPS
Has the charging problem been repaired before? Please ChooseNo, it was not repaired.Yes, it was repaired.
Below are the solutions for the malfunction you have mentioned.
If your device has not had a battery change recently, a charging socket replacement or a repair related to the charging integration, only battery replacement can solve the problem. If battery replacement does not solve the problem, charging socket replacement or motherboard repair can be done.
1. Charging Socket Replacement 2. Charging Integration - Motherboard Repair
If your device has had a charging socket replacement or a repair related to the charging integration before, it should be examined before making a new operation. If the charging socket is faulty, it is replaced, but if there is an integrated problem, it is important that the motherboard was not damaged in the previous operation.
1. Charging Socket Replacement 2. Charging Integration - Motherboard Repair 3. Battery Replacement
The source of the problems of not opening due to falling and impact can be many different reasons. It could be just a simple cable failure, display or battery failure, or a complicated motherboard failure and there are hundreds of chips on the motherboard. For this reason, we cannot share clear information until the defective parts are detected by us.
Devices exposed to liquid contact may have very complicated malfunctions. Sometimes a simple liquid cleaning is sufficient, sometimes a battery replacement, and in some cases, dozens of parts may need to be replaced and repaired. For this reason, we cannot share clear information until the defective parts in liquid contact are detected by us.
1. Liquid Cleaning 2. General review
The majority of the errors that occur during the update are due to memory integration and data loss is usually experienced. Another reason is faulty hardware in your device. Malfunctions in hardware such as Face ID, Touch ID or camera can cause software errors.
1. Memory Integration - Motherboard Repair 2. Hardware Failures
There can be many reasons for devices that break down on their own while standing on charge. While most of them are caused by the battery, there may also be a problem with the memory integrated, charging integration or software. Another reason is faulty hardware in your device.
1. Battery review 2. Software review 3. Motherboard review
There may be a problem with your battery or charger. Especially if your battery values have dropped below 80%, your battery must be replaced. If the battery values are above 90% and the battery has not been replaced before, an investigation is required.
1. Battery Replacement 2. Charging Integration Replacement 3. General review
If the sound is low, it will usually be sufficient to simply clean the dust that has entered and adhered to the filter. In cases where filter cleaning is not sufficient, it will be necessary to change the filter, and if it is not enough, the handset module will need to be replaced.
1. Filter Cleaning 2. Filter Change 3. Microphone Change
If the sound does not come and goes at all, and the speaker key is grayed out and cannot be pressed when you make a call, your device needs audio integrated repair. It is a chronic malfunction especially on iPhone 7 and 7 Plus models.
1. Audio Integrated Motherboard Repair
If the sound is low from the speaker, it will usually be sufficient to simply clean the dust that has entered and adhered to the filter. In cases where filter cleaning is not sufficient, it will be necessary to change the filter, and if it is not enough, the speaker module will need to be replaced.
1. Filter Cleaning 2. Filter Change 3. Speaker Replacement
Especially if there is no sound during a video call, the problem is usually caused by the camera microphone. Try making a FaceTime call and taking a video with the front camera. If any of them have sound, the front camera microphone or the main microphone of your device will need to be changed, depending on the situation.
1. Front camera microphone replacement 2. Main microphone replacement
If only one camera is not working, first power cycle the device and try again. If the problem is not fixed, camera replacement will solve the problem. As a last resort, motherboard repair can be done. If there is a blurry or hazy image and your camera glass is cracked or cracked, only glass replacement may solve the problem.
1. Software Control 2. Camera Change 3. Motherboard Repair 4. Camera Glass Replacement
If there is no problem with the image quality of the cameras, replacing the camera glass will suffice. Camera replacement may also be necessary if the cameras have a hazy, blurry or smeared image.
1. Camera Glass Replacement 2. Camera Change
It is a malfunction that occurs especially after an iOS update or reset. While your device was working perfectly before, it has now failed and requires repair on the motherboard.
It has given a baseband error on the motherboard and the network integration needs to be repaired. In the unlikely event that the antenna Flex cable is damaged and replacing the cable or antenna may solve the problem.
1. Baseband, Motherboard Repair 2. Antenna Replacement
Sim socket replacement or antenna replacement will solve the problem. Otherwise, motherboard inspection is performed.
1. SIM Socket replacement 2. Antenna Replacement 3. Motherboard review
Only glass can be changed in your device, but as Kayatech, we do not recommend this process.
All phone models come with reinforced glass called Gorilla Glass or Ceramic Shield, but it breaks and scratches much more easily when the glass is replaced. In addition, unprofessional glass replacements cause touch sensitivity and fluctuations on the screen. Finally, even if it is said that there is a guarantee on the screens with glass replacement, since the only part of the device that has been changed is the glass, the screen is not guaranteed and glass breakage is not covered by the warranty.
Screen replacement will fix the problem. There is a small possibility, if your device has received a very large impact or has received liquid contact, the touch IC may need to be checked.
1. Screen Replacement 2. Image Integration
1. Screen Replacement
If you accidentally press the keys while talking on the phone, the screen does not turn off automatically, and the proximity sensor will be sufficient, you do not need to change the screen.
1. Proximity Sensor Replacement
If the battery is still draining fast, getting hot or shutting down even though you have had the battery replaced, there may be several alternatives. The most common problem is that the replacement battery is not of sufficient quality. Unfortunately, all of the batteries sold as original are fake and poor quality products. The fact that the battery values are 100% is not a clear criterion, and the batteries sold as having a high mAh capacity unfortunately do not give the expected performance. If the installed battery is of good quality, your second alternative device is drawing too much current.
1. Battery Replacement 2. Motherboard Controls
Especially if your battery values have dropped below 80%, your battery must be replaced. If the battery values are above 90% and the battery has not been replaced before, an investigation is required. It can be caused by the battery itself, or it can be due to a motherboard failure.
1. Battery Replacement 2. Motherboard Repair
In order for Face ID to be repaired, the original Face ID part of your device must be present. Face ID can be repaired but cannot be replaced as a part.
1. General review 2. Face ID - Motherboard Repair
The original Touch ID part of your device must be present in order for Touch ID to be repaired. Touch ID can be repaired, but when it is replaced as a part, it will not read fingerprints, it will only work as a key.
1. General review 2. Touch ID - Motherboard Repair 3. Key Change
1. Fluid Cleaning 2. General review
Devices exposed to liquid contact may have very complicated malfunctions. Although your device is working now, it may give different malfunctions due to oxidation over time. For this reason, a detailed internal cleaning should be done in order to prevent oxidation in devices exposed to liquid. We cannot share clear information until the defective parts in liquid contact are detected by us.
If your device has never been treated before and has not been exposed to liquid or shock, battery replacement usually solves the problem. Otherwise, motherboard controls are provided.
1. Battery Checks 2. Motherboard Controls
If your device has seen a charging socket replacement, charging integrated repair or motherboard repair before, it should be examined before making a new operation. In some cases, screen-related heating problems are also observed. A fault related to the previous operation may have repeated, or a new fault may have occurred on the motherboard. In this type of faults, the first check is made on the battery and usually the battery replacement solves the problem.
There are hundreds of chips on the motherboard, so we cannot share clear information until the defective parts are detected by us. Devices with the Apple logo often require repair of the memory chip and the information inside is often erased.
1. General review 2. Motherboard Repair
There is no such thing as burning the motherboard. It is incomplete and erroneous information given by people who do not have enough knowledge about motherboard repair. There are hundreds of chips on the motherboard, as a result of the failure of some of these chips, your device will fail or the device will not turn on. After the defective parts are detected, they can be repaired. In some cases (especially if there was a previous faulty operation) it may not be possible to repair the motherboard.
Error codes represent motherboard malfunctions. There are hundreds of chips on the motherboard, so we cannot share clear information until the defective parts are detected by us. Devices with the Apple logo often require repair of the memory chip and the information inside is often erased.
There are hundreds of chips and ICs on the motherboard such as mains IC, touch IC, charging IC, memory IC, so we cannot share clear information before the defective parts are detected by us. Devices with the Apple logo often require repair of the memory chip and the information inside is often erased.
If your WiFi and Bluetooth on button works, but receives little or no reception, the problem is most likely caused by an antenna malfunction, antenna replacement will be sufficient.
If your WiFi and Bluetooth on button are not working, the problem is caused by the motherboard and motherboard repair is required. Antenna replacement will not fix the problem.
If the GPS cannot detect your location accurately or quickly when using navigation, GPS antenna replacement or motherboard repair is required.
1. GPS Antenna Replacement 2. Motherboard Repair
Would you like us to help you with the malfunction/problem you are experiencing? Yes, please contact me.No, thank you.
Your Phone Number
Your Adress
You can contact us at any time at this number.
Contact: +1 302-266-4955
